Wednesday, December 15, 2021
Project Log: Altburg - Townhouse I, Part 16 - Final Showcase
In the end I decided to add even more color to the model by painting the plaster on the second floor in dark blue color and red and white stripes pattern on the window shutters. The red and white pattern for the shutters was a good call in my opinion. They make a model look really striking. This is the first model that will be featured on my Altburg display/gaming board. Now its time to wrap it up and move to another project. So without further ado, here are the photos of the final piece: Until the next time, cheers guys! 🍻
Monday, December 13, 2021
Project Log: Altburg - Townhouse I, Part 15
Monday, December 6, 2021
Project Log: Altburg - Townhouse I, Part 14
For the plaster on the first floor I decided to go with the reddish terracotta color to break the monotony a little bit. I really like how it turned out. I am even thinking about adding different color to the second floor, maybe green or blue, but I will see about that. I have to paint the balcony, little cargo room on the back and protruding window on the side first.
Thursday, December 2, 2021
Mortreich's Black Knights WIP pt.3
For my Black Knights standard bearer I wanted to use the classic skeleton horseman (I believe from 1993.) which I had sitting in my collection for quite some time. After some thinking I gathered the bits I needed for the project. For the hand holding the banner pole I used the one from the 90's Black Knights Command group blister. Flag is from the Death Upgrade Kit from Games Workshop.
On the horseman I had to cut off the arm, and on the banner pole the blade and the scull. I also had to remove all the rivets from the pole. Once I removed all unwanted parts I assembled the model. I left the banner unglued so I can paint the model easier.
The new arm fitted perfectly onto the body. I didn't even have to use the modelling putty. Once I had it assembled it was time to bring him to un-life with some colors. :)
After I finished painting I realized that the banner is causing the model not to fit into the unit. I resolved this by heating the lower part of the banner (since it is made in resin) with a hairdryer and banding it backwards. This way not only was I able to fit the bearer into the unit, but also the flag looks more natural, like it is waving against the wind. With the Standard Bearer done, the first rank of my massive unit of black knights is completed!I think that the whole unit of 24 knights will be really a sight to see! 🧛
Friday, November 26, 2021
Project Log: Altburg - Townhouse I, Part 13
The ground floor is still missing all the details, like lanterns, doors, sign, shutters, etc.
Now, on to the upper floor! :)Wednesday, November 24, 2021
Mortreich's Black Knights WIP pt.2
I finally got around to paint some of my undead minis, after finishing with the Midgard house project (although I still have to paint it). The project took me a couple of months to finish and during that time I haven't painted any miniatures. So working on my Mortreich's Black Knights again was a real joy. I completed another three, including the champion and musician. Now I have 7 out of 24 done.